Arthurized Home has french doors that developed some wood rot along the threshold. The folks at a big box home improvement center told us it couldn’t be repaired and that we should replace the entire door unit; to the tune of well over $1,000.
My sister had just successfully repaired a wooden column on her front porch using Abatron’s LiquidWood and WoodEpox, so we decided to give it a try. We ordered a kit from Amazon that was about $40.
The first step is to scrape away all of the rotten wood. Really dig in there and make sure you get it all. Remove anything that comes off easily. We were horrified to see the true extent of the damage, especially on that center support.
Tape off the area where you will be working in case there are epoxy drips. Use plastic sheeting if necessary. This product is meant to last, and drips or spills will not clean off easily.
The next step is to stabilize the adjoining area using LiquidWood. It’s an epoxy mixture that soaks into the wood and hardens it, preventing it from future rot. I probably went a little overboard drilling holes here, but I wanted to be extra thorough. I drilled slightly downward so the epoxy would flow down into the holes, not right back out of them. Mix the LiquidWood according to the package directions and paint onto your project, completely covering any exposed wood.
Let the epoxy dry completely.
Now comes the fun part! Mix the two-part WoodEpox together according to the package directions. It’s like playing with putty! Make sure the colors blend completely to solid white. That’s how you’ll know it is thoroughly mixed. Work quickly and in small batches; this starts to set up shortly after mixing.
Smoosh (yes, that’s the technical term! Smoosh!) it into and onto the areas you’re repairing. This product sands easily, so don’t be shy about piling on the WoodEpox. Apply enough product so that when you sand, you don’t end up with dimples or valleys.
Let that dry completely and start sanding. I used a triangular detail sander to get into those corners.
So much better!
Once the repair is complete you can paint the WoodEpox. This repair is almost four years old now, and still looks (and functions) as good as new.
For more information on the products that I used to repair my door frame:
This post is not sponsored; I’m simply sharing my honest experience with this product.
Disclosure: In addition to occasional sponsored posts, Arthurized Home uses clickable affiliate links. That means that I may receive a small commission from sales at no extra charge to you. As always, my opinion is 100% my own, and I only recommend things that I truly love or use myself. Thank you for patronizing the brands that support Arthurized Home!
Copyright 2019 © Arthurized Home – All Rights Reserved. This post is the original content of Arthurized Home. If you’re reading this on another site, it’s unArthurized.